Inserting SMARTCORE stick
Inserting SMARTCORE stick
A SMARTCORE STICK may be broken in the device. Try using a toothpick to remove the part of the stick that remains in the device.
A SMARTCORE STICK may be broken in the device. Try using a toothpick to remove the part of the stick that remains in the device.
Why do I see white lights blinking on my device and it continuously switches off during my experience?
Why do I see white lights blinking on my device and it continuously switches off during my experience?
This is the experience count down. When you feel another vibration with only one light pulsing in white, your IQOS experience is nearly over (30 sec or 2 sessions remaining). Slide to close the cap.
This is the experience count down. When you feel another vibration with only one light pulsing in white, your IQOS experience is nearly over (30 sec or 2 sessions remaining). Slide to close the cap.
What does it mean when all lights are blinking twice in white and then it switches off?
What does it mean when all lights are blinking twice in white and then it switches off?
Your IQOS ILUMA ONE may be out of range of temperature (0°C⁓40°C). If it's too cold, try to warm it in your hands and try again.
Your IQOS ILUMA ONE may be out of range of temperature (0°C⁓40°C). If it's too cold, try to warm it in your hands and try again.
Bottom light blinks yellow
Bottom light blinks yellow
Tap the button on your IQOS ILUMA ONE to check the battery level. If the bottom of the light strip blinks yellow, this means the battery is low on charge. Charge the IQOS ILUMA ONE with the manufacturer-approved power adaptor. For a full charge, plug the device for at least 75 minutes. When full, all lights will stay solid white and then turn off.
Tap the button on your IQOS ILUMA ONE to check the battery level. If the bottom of the light strip blinks yellow, this means the battery is low on charge. Charge the IQOS ILUMA ONE with the manufacturer-approved power adaptor. For a full charge, plug the device for at least 75 minutes. When full, all lights will stay solid white and then turn off.
Bottom light blinks red
Bottom light blinks red
There might be a little error, please try to reset your IQOS ILUMA ONE. If the red light persist, please contact our IQOS Customer Care for assistance.
There might be a little error, please try to reset your IQOS ILUMA ONE. If the red light persist, please contact our IQOS Customer Care for assistance.
Reset
Reset
Press the IQOS ILUMA ONE button for 7 seconds, then release the button. All Status Lights will turn off, blink twice and turn on to confirm the reset.
Press the IQOS ILUMA ONE button for 7 seconds, then release the button. All Status Lights will turn off, blink twice and turn on to confirm the reset.
Does the SMARTCORE STICK have lower areosol quality?
Does the SMARTCORE STICK have lower areosol quality?
1. The IQOS ILUMA Holder only needs to detect the presence of a SMARTCORE STICK in order to start an experience. A used stick will not be able to generate any substantial aerosol.
2. Ensure that the SMARTCORE STICK was inserted correctly as per the user guide instructions.
3. SMARTCORE packs should not be stored in an environment which is too humid or too dry. Doing so can have an effect on the aerosol quality.
1. The IQOS ILUMA Holder only needs to detect the presence of a SMARTCORE STICK in order to start an experience. A used stick will not be able to generate any substantial aerosol.
2. Ensure that the SMARTCORE STICK was inserted correctly as per the user guide instructions.
3. SMARTCORE packs should not be stored in an environment which is too humid or too dry. Doing so can have an effect on the aerosol quality.