Tap the button on your IQOS ILUMA ONE to check your battery level. If the level is low, then charge the device. If the battery is completely discharged, it can take up to 90 minutes.
By pressing the button for four seconds you can turn the device ON/OFF.
Slide the cap to open and gently insert a SMARTCORE STICK™ to the line on filter with filter facing outside as seen in the video. Press the button for at least 1 second until IQOS ILUMA ONE vibrates and Status Light(s) pulse(s). Keep the SMARTCORE STICK™ in position during the preheating. Start using once IQOS ILUMA ONE vibrates and Status Lights stay fixed.
When you feel another vibration and only one Light pulsing white, your IQOS time is nearly up (30 sec or 2 puffs remaining).
Good to know: - During use, the experience will stop if the SMARTCORE STICK™ is removed from your IQOS ILUMA ONE. - The IQOS ILUMA ONE will stop if the ambient temperature is out of range (0℃-40℃). If so, all lights blink twice in white and then switch off. If the ambient temperature is low, try warming the device in your hand for at least a minute.
-1?qlt=85&ts=1730708664523&dpr=off)
