Follow this quick guide and get ready to use your IQOS 3.
TURNING ON
To turn the IQOS 3 Pocket Charger on or off, press the button at the top for 4 seconds.
BATTERY LEVEL
IQOS 3 Holder
Check if the Holder is charged by pressing the central button. No light tells you it’s time to recharge the Holder.
IQOS 3 Pocket Charger
Tap the button at the top to check the battery level. 4 bars show a full charge. One bar flashing means it’s time to plug the Pocket Charger into a power outlet using the original IQOS Power Adaptor and Cable.
HOW TO USE
To use your IQOS 3, gently insert a HEETS stick into the Holder. Don’t twist it. If you do, you risk breaking the heating blade. After you’ve inserted the HEETS stick, press and hold the Holder button. You’ll feel a vibration and the light will pulse slowly. That means that the Holder is getting ready.
When you feel two vibrations and the status light is steadily on, it means you’re good to go.
If you feel two vibrations again, that means your IQOS time is nearly up. Slide the IQOS 3 Holder open, remove the HEETS stick, and slide it back to close the Holder. Place the Holder back in the Pocket Charger.
While the IQOS 3 Holder is in the Pocket Charger, watch the small round light on top of the Pocket Charger. When it’s blinking, it means that the Holder is charging. When the light comes back on, it means that you can take the Holder out and can start using IQOS again.
Click here to watch the video.
TURNING ON
To turn the IQOS 3 Pocket Charger on or off, press the button at the top for 4 seconds.
BATTERY LEVEL
IQOS 3 Holder
Check if the Holder is charged by pressing the central button. No light tells you it’s time to recharge the Holder.
IQOS 3 Pocket Charger
Tap the button at the top to check the battery level. 4 bars show a full charge. One bar flashing means it’s time to plug the Pocket Charger into a power outlet using the original IQOS Power Adaptor and Cable.
HOW TO USE
To use your IQOS 3, gently insert a HEETS stick into the Holder. Don’t twist it. If you do, you risk breaking the heating blade. After you’ve inserted the HEETS stick, press and hold the Holder button. You’ll feel a vibration and the light will pulse slowly. That means that the Holder is getting ready.
When you feel two vibrations and the status light is steadily on, it means you’re good to go.
If you feel two vibrations again, that means your IQOS time is nearly up. Slide the IQOS 3 Holder open, remove the HEETS stick, and slide it back to close the Holder. Place the Holder back in the Pocket Charger.
While the IQOS 3 Holder is in the Pocket Charger, watch the small round light on top of the Pocket Charger. When it’s blinking, it means that the Holder is charging. When the light comes back on, it means that you can take the Holder out and can start using IQOS again.
Click here to watch the video.
أشياء إضافية يمكن عملها
