To clean your IQOS Holder:
- Prepare
- Switch off your IQOS Holder.
- Wait for at least 30 seconds for the blade to cool down.
- Remove the cap.
- Slide open your IQOS Cleaning Tool and check that it’s free from particles and not damaged.
- Insert
- Gently insert the IQOS Cleaning Tool without twisting, until it touches the bottom of the heating chamber.
- Clean
- Gently twist the IQOS Cleaning Tool two or three times.
- Stop twisting and remove the Cleaning Tool straight from the Holder.
- Gently tap the Holder and the Cleaning Tool to remove any tobacco residue.
- Finish
- Insert the IQOS Cleaning Stick into the chamber.
- Please don’t push or hit the Stick against the blade.
- Please don’t try to clean the blade.
- If the IQOS Cleaning Stick is blocked, don’t force it. Use the Cleaning Tool to help unblock it.
To clean your IQOS cap:
- Use the IQOS Cleaning Sticks to clean the inside of the cap from the top.
- To clean the bottom of the cap:
- Insert the IQOS Cleaning Tool until it touches the bottom.
- Gently twist the IQOS Cleaning Tool two or three times.
- Then stop twisting, and gently tap both the cap and the IQOS Cleaning Tool to remove any tobacco residue.